A hoodie that handles snow, wind, and a sweaty lap is worth far more than one that soaks through in ten minutes. We compared the best snowboard hoodies on waterproofing, warmth, fit, and real riding features, so you can pick one that works as a layer, a lift-ride jacket, or both.
686 Waterproof Hoody
- 3-layer infiDRY softshell rated 10K waterproof and 10K breathable
- Soft polyester fleece backing for warmth
- Side-seam zips double as pit vents
- 4.9 out of 5 average rating on 232 reviews at one major retailer
- Seams are not sealed, so it is not a full storm jacket
- No insulation, so the coldest days need layers
Overview
The 686 Waterproof Hoody pairs the comfort of a favorite sweatshirt with real waterproof technology, built for riders who want to wear a hoodie through powder days.
Key features and benefits
- infiDRY 10K softshell, 3-layer bonded with two-way stretch
- Polyester fleece backing and PFAS-free DWR
- Side-seam zippers that double as pit vents
- Kangaroo pocket, pass pocket with key clip, and audio buttonhole
- Glove Link thumb grips and adjustable hood, cuffs, and hem
Why We Recommend It
We rank the 686 Waterproof Hoody first because it is the only hoodie here with a true waterproof and breathable membrane. A 10K/10K rating means rainproof and waterproof under light pressure, which is enough for most snowy resort days without wearing a full jacket.
Reviewers rate it extremely well, with an average of 4.9 out of 5 across 232 reviews at one retailer. One called it a nice midlayer or shell for cold, dry days, and another said the waterproofing felt genuine after several days of skiing in it.
The design is practical: a softshell with a fleece backing, side zips that double as vents, Glove Link thumb grips, a zippered kangaroo pocket, and a Velcro pass pocket with a key clip. The seams are not sealed, so it will not replace a storm jacket in a heavy dump.
For riders who want a hoodie that looks like a hoodie but performs like a light jacket, this is the strongest pick on the list.
2. Burton Crown Weatherproof Riding Pullover Hoodie
Burton Crown Weatherproof Riding Pullover Hoodie
- DRYRIDE Mist-Defy recycled bonded fleece with 10K/10K lamination
- Relaxed, gender-neutral fit
- Underarm eyelet vents and a rear-adjustable hood
- Lifetime warranty
- Burton rates warmth low, at about 2 out of 5
- Priced around $140
Overview
Burton’s Crown Weatherproof Riding Pullover Hoodie brings weather-shedding tech to a classic hoodie, techy enough for mountain days and laid-back enough for town.
Key features and benefits
- DRYRIDE Mist-Defy 100% recycled polyester bonded fleece
- 10K/10K lamination
- Relaxed fit with gender-neutral sizing
- Fulltime hood with rear adjustment and underarm eyelet vents
- Zippered handwarmer pockets and a drop-in pocket with a phone pocket inside
Why We Recommend It
We include the Crown because it bonds a laminated 10K/10K membrane to a soft fleece, which gives it more weather resistance than a plain fleece hoodie. Burton describes it as real mountain-ready weather-shedding tech for light snow and rain.
The practical details are well chosen. Raglan sleeves, a stretch back neck tape, adjustable cuffs, a bungee hem cinch, YKK zippers, and a rear-adjustable hood keep it comfortable and secure on the hill.
Be realistic about warmth. Burton rates it around 2 out of 5 for warmth and 3 out of 5 for waterproofing, so it works best as a midlayer or on mild days rather than in deep cold.
For riders who want a laminated, hoodie-style layer from a brand with a lifetime warranty, it is a polished, versatile choice.
3. Volcom Hydro Riding Hoodie
Volcom Hydro Riding Hoodie
- 290g hydrophobic fleece repels water
- Helmet-compatible riding hood with a bungee cinch
- Thumbholes and ribbed cuffs and hem
- Built-in neck warmer
- Water-repellent, not waterproof
- Baggy riding fit may feel big for some
Overview
Volcom’s Hydro Riding Hoodie reworks the everyday hoodie for the slopes, using hydrophobic fleece that sheds moisture so wet sessions stay warmer.
Key features and benefits
- 290g hydrophobic fleece, 100% polyester
- Riding hood with a bungee cinch, helmet compatible
- Zippered pockets and thumbholes
- Ribbed cuffs and hem
- Relaxed riding fit
Why We Recommend It
We include the Hydro because it is built specifically for riding rather than just casual wear. The hood is layered at the front to protect your face on windy chairlifts, and it works over or under a helmet.
The 290g hydrophobic fleece is brushed inside for comfort and highly water-repellent outside, so it can work as a midlayer or on its own in cold, wet conditions. A built-in neck warmer adds extra coverage at the collar.
Zippered hand pockets keep essentials secure, thumbholes lock the sleeves in place, and the baggy riding fit leaves plenty of room to move. It is water-repellent rather than waterproof, so a shell is still smart in a real storm.
For riders who want a warm, riding-specific fleece hoodie with a helmet-friendly hood, this is a comfortable, well-designed pick.
4. ThirtyTwo Snow Sport Hoodie
ThirtyTwo Snow Sport Hoodie
- Midweight 300 GSM cotton-polyester fleece
- Repel DWR coating sheds water
- 3-panel hood with drawstrings
- Kangaroo pocket and ribbed cuffs and hem
- Water-resistant, not waterproof
- Cotton-blend fleece dries slower than pure polyester
Overview
ThirtyTwo’s Snow Sport Hoodie is a classic riding hoodie, a midweight fleece with a water-repellent coating that works as a midlayer or outer layer.
Key features and benefits
- 300 GSM 60/40 cotton-polyester fleece with a DWR coating
- 3-panel hood with 32 drawstrings
- Kangaroo pocket
- Ribbed cuffs and hem
- Regular to relaxed fit
Why We Recommend It
We include the ThirtyTwo hoodie because the 300 GSM fleece is a good middle weight for a riding layer. It slots under a coat on cold, wet days, and the DWR coating handles a bit of rain without much trouble.
Retailers describe it as highly breathable and weather-resistant, with fabric that wicks moisture away from the skin. The soft cotton-poly blend feels like a regular sweatshirt, which is exactly what many riders want from a hoodie.
The 3-panel hood, kangaroo pocket, and ribbed cuffs and hem are simple and functional. Some versions add underarm gussets for movement, and others add a sleeve pass pocket, so check the specific style you are buying.
For riders who want a no-nonsense, cozy hoodie with light water resistance from a trusted snowboard brand, it is a dependable choice.
5. Outdoor Research Vigor Grid Hoodie
Outdoor Research Vigor Grid Hoodie
- Grid fleece is breathable, wicking, and quick drying
- ActiveTemp thermoregulating treatment and UPF 30
- 3-panel hood with balaclava-style coverage
- Stretchy 94% polyester, 6% spandex fabric
- Snug, trim fit leaves less room for bulky layers
- Not water-resistant like the DWR hoodies here
Overview
Outdoor Research’s Vigor Grid is a lightweight performance fleece with a waffle grid back, built to regulate body heat during high-output activity.
Key features and benefits
- Grid fleece with ActiveTemp thermo-regulating treatment
- UPF 30 sun protection
- Flat-seam, chafe-free construction
- 3-panel hood with a full-coverage balaclava-style collar
- Ergonomic thumbholes and zippered pockets
Why We Recommend It
We include the Vigor Grid for riders who run hot. The waffle grid interior traps warmth while letting excess heat escape, which suits hiking to a line, touring, or pushing a board across a flat.
The fabric is a bluesign approved polyester and spandex blend that stretches with you, and flat seams and a chafe-free design keep it comfortable under a pack or jacket. The close-fitting hood has a high collar that can cover your chin and mouth like a balaclava.
It is a layering piece rather than a weather shield. The listing may be the pullover or full-zip version, so confirm which you are buying, and expect a trim fit best worn over low-profile base layers.
For active riders who want a breathable, stretchy technical fleece hoodie, it is a smart, performance-focused choice.
6. Backcountry Meltdown Water-Resistant Hoodie
Backcountry Meltdown Water-Resistant Hoodie
- Soft polyester pique fleece with a PFC-free DWR finish
- Adjustable 3-panel hood
- Tall kangaroo pocket plus a zippered chest pocket
- Limited lifetime warranty
- Some reviewers found it runs big and is not very warm
- No thumbholes
Overview
Backcountry’s Meltdown is a water-repellent fleece hoodie designed as a midlayer in deep winter and a top layer on spring days.
Key features and benefits
- 100% polyester pique fleece with a PFC-free DWR treatment
- Adjustable 3-panel hood
- Raglan sleeves and seams placed to reduce friction
- Kangaroo pocket and a zippered chest pocket
- Regular fit with a 30 inch center back length
Why We Recommend It
We include the Meltdown because it covers the basics well at a modest price. The fleece is brushed and soft against the skin, the DWR sheds light snow and drizzle, and the ribbed cuffs and hem keep wind and snow out.
Details are thoughtful: raglan sleeves for movement, forward side and underarm seams so a pack does not rub, and a zippered pocket for a lift pass or phone. A reviewer called it soft and warm, though others found it comfy but not especially warm.
One tester also found the sizing generous, so consider sizing down if you want a closer fit.
For riders who want a simple, soft, water-resistant hoodie for lift laps without a high price, it is a good-value choice.
7. Burton Oak Pullover Hoodie
Burton Oak Pullover Hoodie
- Regular fit that is not too tight or too baggy
- Drawcord hood and kangaroo handwarmer pocket
- Lifetime warranty from Burton
- Simple, comfortable styling
- Not waterproof or especially water-repellent
- Burton rates warmth low, at about 1.5 out of 5 for the current version
Overview
Burton’s Oak Pullover Hoodie is the kind of clean, simple hoodie Burton has built since day one, a comfortable layer that works at the lodge and on the mountain.
Key features and benefits
- Regular fit
- Drawcord hood
- Kangaroo handwarmer pocket
- Ribbed or self-fabric cuffs and hem
- Lifetime warranty
Why We Recommend It
We include the Oak as the casual pick on this list. It is a straightforward fleece hoodie with a regular fit, so it layers easily under a jacket or works on its own for lodge breaks and chilly lift rides.
Burton rates the current Oak at about 1.5 out of 5 for warmth, so treat it as a light layer rather than a cold-weather piece. It has no waterproofing, so it is best on dry days or tucked under a shell.
The fabric and details have changed between seasons, from an organic cotton blend to a quick-drying brushed polyester with thumbholes in newer versions, so check the specific listing before buying. Burton backs its outerwear and layers with a lifetime warranty.
For riders who want a simple, comfortable, no-frills Burton hoodie for mild days and layering, it is a dependable pick.
8. Oakley Rider Long 2.0 Hoodie
Oakley Rider Long 2.0 Hoodie
- O-Protect DWR finish sheds water
- Longline cut adds coverage
- Front zippered pockets and an adjustable drawcord hood
- Stretch fabric and elastic cuffs and hem
- Water-repellent only, and the DWR needs occasional refreshing
- Fabric blend is listed differently across retailers
Overview
Oakley’s Rider Long 2.0 blends street-ready style with riding-friendly features, with a longline fit and a water-repellent finish aimed at chilly sessions and days off the mountain.
Key features and benefits
- O-Protect DWR treatment repels water
- Longline fit with extended coverage
- Adjustable drawcord hood
- Front zippered pockets
- Elastic cuffs and hem with Thermonuclear Protection branding
Why We Recommend It
We include the Rider Long 2.0 for riders who care about style as much as function. The longer cut adds warmth and coverage over the hips, and the clean Oakley design works as well in town as it does on the mountain.
The O-Protect DWR treatment repels water so the surface stays drier, and a stretch fabric lets you move freely. Front zippered pockets keep essentials secure, and elastic cuffs and hem lock in warmth.
The DWR is a surface treatment, not a membrane, and it may need refreshing with a tech wash over time. Retailers list the fabric differently, so check the label if the blend matters to you.
For riders who want a longline, branded hoodie with light water resistance for mild sessions and everyday wear, it is a stylish, practical pick.
Final Thoughts
Picking from the best snowboard hoodies comes down to how much weather you expect and how much you value warmth. The 686 Waterproof Hoody stands alone as a true waterproof option, while the Burton Crown offers a laminated fleece with a lifetime warranty.
The Volcom Hydro, ThirtyTwo, and Backcountry Meltdown are the best choices if you want soft, water-repellent fleece for lift rides. Outdoor Research brings a breathable, high-output option, and the Burton Oak and Oakley Rider Long 2.0 round out the list with simple, stylish layers for mild days.
Whichever hoodie you choose, remember that water-repellent is not waterproof. If real snow or rain is in the forecast, pair your hoodie with a shell or pick one with a membrane, like the 686.
If you’re looking for more protection against wind, snow, and cold weather, check out our guide to the best snowboard jackets to find the right outerwear for your next day on the mountain.
Can a hoodie replace a snowboard jacket?
On mild, dry days a membrane hoodie like the 686 Waterproof Hoody can, since a 10K/10K rating is waterproof under light pressure. For heavy snow, storms, or deep cold, a full jacket or a shell over your hoodie is the safer choice.
What is the difference between water-resistant and waterproof?
Water-resistant fabrics use a DWR coating to shed light snow and drizzle, while waterproof fabrics add a membrane, such as the 10K/10K laminate in the Burton Crown or the infiDRY layer in the 686. A 10,000mm rating means rainproof under light pressure.
What is DWR?
DWR stands for durable water repellent, a surface coating that makes water bead up and roll off. It wears down over time, so many brands recommend refreshing it with a tech wash and low heat.
Fleece or softshell: which is better for riding?
Fleece, like the Volcom Hydro or Backcountry Meltdown, is softer and warmer for its weight, while a softshell, like the 686, blocks more wind and snow. Choose fleece for layering and a softshell for solo wear.
Will a hoodie fit under a helmet?
Many riding hoodies use hoods designed to fit over or under a helmet, like the Volcom Hydro’s riding hood. If your hood is bulky, wear it over the helmet instead and cinch the drawcord.
How should a snowboard hoodie fit?
Most riders prefer a regular or relaxed fit with room to layer, though trim options like the Outdoor Research Vigor Grid suit a base-layer-only look. Sizing varies, and reviewers noted the Backcountry Meltdown can run big.
Can I wear a hoodie as a mid-layer under a jacket?
Yes, most hoodies here work well as a mid-layer, especially pullover styles without bulky zippers. Thumbholes, found on the Burton Oak and Volcom Hydro, help keep the sleeves from riding up under a jacket.
How do I wash a technical snowboard hoodie?
Check the care label first. The 686 Waterproof Hoody is machine washable on cold with mild detergent, and DWR-treated hoodies from Oakley and ThirtyTwo may need an occasional tech wash and low heat to restore water repellency.
